MODEL DA8 MOISTURE PROBE FOR GRANULAR MATERIALS AND POWDERS
The MODEL DA8 is a battery operated, hand held moisture meter designed for laboratory or in plant test conditions. The DA8 can test materials with a fairly consant bulk density and a consistent change of radio frequency properties with change in moisture content, including semisolids, powdered, granular, or textile materials. 










Operating on the patented radio frequency power loss absorbtion principle, the DA8 projects an RF Field in to the test area. The RF Field extends approximately three inches from the electrode needles. Any material containing moisture will absorb part of this current and cause a change in the meter readings. The meter reading is converted in to moisture content by referring to a calibration curve established for the material being tested.

             WHAT MAKES THE DA 8 DIFFERENT?

The use of solid state sensitivity modules gives the DA8 a uniquely broad moisture range capability. The modules permit more sensitivity in low moisture ranges, as well as the ability to check high moisture content of up to 30%.

                                      MODULE SENSITIVITY 


    450             LOW MOISTURE APPLICATIONS        
    400
    250
    150
    100 
    070
    050
    040
    030
    025
    020
    010             HIGH MOISTURE APPLICATIONS

The needle electrode consists of two 3/16th" tapered stainless steel needles, positioned 3/4 inch apart.

Longer needles test and average more sample, and yield steeper calibration curves. Five different sizes are available.
depending on the most suitable configuration for the application.

2 INCH
4 INCH
6 INCH
12 INCH
5/16th INCH
DA8 Moisture Probe For Granulars # 647 DA8
DA8 SENSITIVITY MODULE

WHITESTONE VA
TEL (804) 318-3686 FAX (703) 991-7133
INFORMATION@QCLABEQUIPMENT.COM 
WWW.QCLABEQUIPMENT.COM
ALL RIGHTS RESERVED QAQC

BUY ONLINE
Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved.
804-318-3686 | sales@qclabequipment.com
EQUIPMENT FOR QUALITY CONTROL AND R&D 
www.qclabequipment.com
Telephone   (804) 318-3686
Toll Free US (866) 244 1578
Fax                (703) 991-7133
Hours      8 AM - 6 PM EST
INTERNATIONAL & DOMESTIC SALES
CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT


DELIVERIES WORLDWIDE

PERFORMANCE GUARANTEE
BROCHURE MRDA8
MANUFACTURING
DISTRIBUTION
TECHNICAL SERVICES ​FOR
ANALYTICAL INSTRUMENTATION

TELEPHONE (804) 318-3686
TOLL FREE   (866) 244-1578

QUICK QUOTE FILL IN RED AREAS ONLY
Email Address
First Name
Ship To Company Name
Last Name
Delivery Street Address
Ship To Postal Code
Telephone
ADD BILL TO INFORMATION
City
State or Province
Ship To Country
Email Address
First Name
Bill To Company Name
Last Name
Delivery Street Address
Postal Code
Telephone
City
State or Province
 Country
ADDRESS SAME AS SHIP TO