SAMPLING DEVICES FOR LIQUIDS 675 7000 RE-USABLE SAMPLER FOR MEDIUM VISCOSITY LIQUIDS (SHAMPOOS CREAMS HONEY) dismantled into its component parts for quick and thorough cleaning. LENGTH 600 mm - 2000 mm Before any analytical test can be conducted, a representative sample of the material to be analyzed, needs to be collected. QAQC LAB Samplers are made from a variety of materials, including 316 grade stainless steel, polypropylene, and HDPE (FDA ACCEPTABLE), depending on the sampling application, as well as in a variety of sizes. Sterile (GAMMA IRRADIATED) Samplers are available for pharmaceutical and food applications. A special range of unit dose samplers has been developed for pharmaceutical sampling to meet the latest GMP and FDA guidelines. Both powder samplers and liquid unit dose samplers are available. For more information about our liquid sampler devices and our particle measurement systems, call us today. WHITESTONE VA TEL (804) 318-3686 FAX (703) 991-7133 INFORMATION@QCLABEQUIPMENT.COM Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved.
Pump Samplers allow the liquids to be quickly sampled. The chance of cross contamination is greatly reduced by using new dip-tube and bottles for each sample. • Suitable for use with low to medium viscosity liquids. • Single Point Sampler • PE, PTFE or 316L stainless steel product contact parts 675 5031 Takes samples straight into the bottle. The spring loaded mechanism means that liquid only flows in when the handle is squeezed. Samples are taken from set locations. • Low to medium viscosity liquids. • Single Point liquid sampling • Sampler body - 316 stainless steel LENGTH 1000 mm - 1500 mm GLASS BOTTLE 500 ml 675 5030 Suitable for high and low viscosity liquids and suspensions • Single Point Liquid Sampler • 316 stainless steel product contact parts LENGTH 600 mm - 1500 mm VOLUME 100 ml - 500 ml 675 5170 An all stainless steel sampler suitable for sampling liquids and suspensions . • Takes a sample at the surface • Made from 304 Stainless steel LENGTH 460 mm - 540 mm VOLUME 50 ml - 100 ml 675 5005 GMP Correct Liquid Sampler • 316 stainless steel • Fully welded • Satin finish LENGTH 600 mm - 1000 mm VOLUME 100 ml - 500 ml 675 5740 The Road Tanker Sampling Valve is designed to allow road tankers to be safely sampled before the tank is discharged. EQUIPMENT FOR QUALITY CONTROL AND R&D Telephone (804) 318-3686 Toll Free US (866) 244 1578 Fax (703) 991-7133 Hours 8 AM - 6 PM EST INTERNATIONAL & DOMESTIC SALES CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT DELIVERIES WORLDWIDE PERFORMANCE GUARANTEE 675 8051H LENGTH 450-1100 mm Low Cost Disposable Liquid Samplers Jumbo Pipettes are quick and easy to use. They are ideal for taking samples from low viscosity liquids. STAINLESS STEEL (SILICONE ORING) 675 5010 Ideal for accurately sampling specific volumes of liquids. Designed specifically for unit dose sampling of liquids in the pharmaceutical industry. • Suitable for sampling low to medium viscosity liquids. • Ideal for low volume (unit dose) sampling. • Made from Sampler body - 316 LENGTH 600 mm - 1800 mm VOLUME 5 ml - 60 ml 675 A324 / 6 • Satin finish • 304 or 316 stainless steel • Crevice free construction LENGTH 275 mm - 370 mm VOLUME 50 ml - 200 ml The Multi Dipper 2 is the ideal solution for taking liquid samples from different levels. The sample collection bottles remain closed until the operator uses the control chain to remove the stoppers. LENGTH 1000 mm - 2000 mm 675 5065F Robust Polypropylene Dipper • Ideal for general industrial applications • Durable polypropylene construction LENGTH 1000 mm VOLUME 250 ml - 1000 ml 675 5056 / 675 5058 Hand or Foot Operated Economical and versatile pumps Each pump is supplied with a Universal Bung Allows the pump to be used with any container which has a round opening between 30 and 70mm. 675 5055 / 675 5054 Quick and easy way of obtaining a liquid sample from a low / medium viscosity liquid. • Individually Bagged • FDA Conforming Materials • BSE/TSE Free • Full Batch Traceability LENGTH 300 mm - 1000 mm VOLUME 2 ml - 60 ml DISPOSABLE LIQUID & VISCOUS SAMPLERS 675 5065 The QAQC TeleScoop is suitable for taking samples from liquids and suspensions. Special tip available for powder sampling. The attachments are all interchangeable with the telescopic rods. LENGTH 720 mm - 6000 mm 675 5035 The Liquid Master is ideal for taking samples from low and medium viscosity liquids. It is available in a range of lengths and diameters to give a range of sample volumes. The Liquid Master is easy to use and is designed to be quickly stripped down for cleaning. LENGTH 600 mm - 2000 mm • Assembled & Packed in a Cleanroom • Individually Bagged • FDA & EU 10/2011Conforming Materials • BSE/TSE Free • Full Batch Traceability • ATEX Rated (500mm and 1000mm lengths only) • Available Sterile (gamma irradiated*) LENGTH 500 mm - 1500 mm HDPE & PP (AVAILABLE STERILIZED) STAINLESS BARREL PUMPS / PP BARREL PUMPS 675 5900 Ideal for quickly and easily transferring large volumes. Rigid or flexible delivery tubes. SUBMERSIBLE LENGTH 360 mm - 1340 mm 675 5100 Excellent Chemical Resistance - GMP correct LENGTH 600 mm VOLUME 100 ml - 1000 ml 675 8920H / 675 8921H The LiquiDip Mono is ideal for taking cross sectional samples. The LiquiDip Duo is for taking both cross sectional samples and point samples. • Individually bagged • FDA and EU 10/2011 conforming material • Cleanroom assembly and packing (ensures cleanliness) • Available both sterile and non sterile • Available from stock for fast delivery worldwide • The LiquiDip Duo can be used as a transport container when both valves are closed LENGTH 450 mm - 1100 mm VOLUME 80 ml - 225 ml Transportable, hose pump for liquids, independent of mains power. Ideal for sampling from barrels, tanks, wells, water separators and sewage and purification systems. MANUFACTURING DISTRIBUTION TECHNICAL SERVICES FOR ANALYTICAL INSTRUMENTATION TELEPHONE (804) 318-3686 TOLL FREE (866) 244-1578 An ideal liquid sampler for most common liquids including water, oils, sludge etc. • Manufactured from spark suppressant brass • Bottle easily removed using patented click system • 130mm diameter - 300mm high - 3 kg weight 675 5073 With Removable Glass Bottle 675 5072 The Best Selling Heavy Duty Liquid Sampler The Sub Sampler Pro (some times called a ‘Bomb Sampler’) is used throughout the world for both chemical and environmental sampling. Its unique double action means it can sample from a set distance from the bottom of a container or alternatively at a mid-point. The single use pipettes are ideal for taking small surface samples and for general laboratory use. • Easy to use • Made from Low Density Polyethylene (LDPE) • Graduated • Two convenient volumes • Non-sterile
Complete with PVC hose, and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth. AVAILABLE EX RATED 711 5314