SUBMARINE SAMPLERS FOR LIQUIDS
TEL (804) 318-3686 FAX (703) 991-7133
Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved.
EQUIPMENT FOR QUALITY CONTROL AND R&D
Telephone (804) 318-3686
Toll Free US (866) 244 1578
Fax (703) 991-7133
Hours 8 AM - 6 PM EST
INTERNATIONAL & DOMESTIC SALES
CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT
TECHNICAL SERVICES FOR
TELEPHONE (804) 318-3686
TOLL FREE (866) 244-1578
With Removable Glass Bottle
SUBMARINE SAMPLER PRO
The Best Selling Heavy Duty Liquid Sampler
An ideal liquid sampler for most common liquids including
water, oils,sludge etc.
• Manufactured from spark suppressant brass
• Bottle can be easily removed using patented click system
• 130mm diameter - 300mm high - 3 kg weight
1. Lower Sub Sampler to the required depth.
2. Pull up sharply on the lowering cable to pull the stopper out
of the bottle.
3. Wait a few seconds for the liquid to flow into the bottle
4. Pull up the Sub Sampler and retrieve the sample
Hand reels and cables are essential accessories when using sub
samplers (Bomb Samplers). The standard heavy duty hand reel is suitable for most situations.
However if you are using the sampler in an Ex rated environment use the Hand Reel Ex with the copper cables.
Do not use stainless steel chain for use in ATEX environments.
The Sub Sampler Pro
(some times called a ‘Bomb Sampler’) is used
throughout the world for both chemical and environmental sampling.
Its unique double action means
it can sample from a set distance from the
bottom of a container or alternatively at a mid-point.
A. Sample from the bottom of a container
- Use a Lowering Cable
The Sub Sampler Pro is lowered until the plunger assembly touches the bottom of the container.
As the plunger assembly is pushed up, the sample is able to enter the device. When the sampler is raised the plunger
will drop down and seal the sampler.
B. Mid-height Sampling
- Use a Lowering Cable and a Control Line
Lower the Sub Sampler Pro into the liquid.
At the required sampling depth pull on the control line
to raise the plunger. This will allow the liquid to enter the sampler. Release the control line and
the plunger will drop down and seal the sampler.
Part No. Volume Material Dimensions (Diameter x Height) Ex Rated
675 5073A1000 1000 ml Nickel plated brass & glass 125 mm x 300 mm Yes*
675 5072A500 500 ml Nickel plated brass 57 mm x 430 mm Yes*
675 5072B500 500 ml 316 Stainless steel 63 mm x 280 mm No
Part No. Description
675 5070004 Standard Heavy Duty Hand Reel - made from polypropylene
675 5070005 Ex Hand Reel - for Ex use rated environments. Made from conductive plastic.
Supplied with earthing leads and clip. Use with copper cable
* Make sure the sampler is properly earthed (grounded) use the Ex Hand Reel (675 50700-05) and Copper cable (675 5070C)
Part No. Description Part No. Description
675 5070510 Chain - 316 stainless steel - 10m 675 5070P10 Polypropylene - braided cord - 10m
675 5070525 Chain - 316 stainless steel - 25m 675 5070P25 Polypropylene - braided cord - 25m
675 5070550 Chain - 316 stainless steel - 50m 675 5070P50 Polypropylene - braided cord - 50m
675 5070010 PTFE coated stainless wire - 10m 675 5070C10 Copper braided cable - 10m
675 5070025 PTFE coated stainless wire - 25m 675 5070C25 Copper braided cable - 25m
675 5070050 PTFE coated stainless wire - 50m 675 5070C50 Copper braided cable - 50m