WHITESTONE VA
TEL (804) 318-3686 FAX (703) 991-7133
INFORMATION@QCLABEQUIPMENT.COM 
WWW.QCLABEQUIPMENT.COM
ALL RIGHTS RESERVED QAQC

Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved.
804-318-3686 | sales@qclabequipment.com
BROCHURE UD MASTER

QUICK QUOTE
EQUIPMENT FOR QUALITY CONTROL AND R&D 
www.qclabequipment.com
Telephone      (804) 318-3686
Toll Free US   (866) 244 1578
Fax                  (703) 991-7133
Hours      8 AM - 6 PM EST
INTERNATIONAL & DOMESTIC SALES
CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT


DELIVERIES WORLDWIDE

PERFORMANCE GUARANTEE
UD MASTER SAMPLER (Meets FDA Guidelines)
The patented U-D Master is designed for multilevel, 
low volume sampling in the pharmaceutical industry.

It is ideal for use with free flowing powders. 
By simply changing the sample inserts (cells), 
different volumes can be sampled. 

The sampler is available in two convenient diameters:

-25mm (Standard U-D Master) 
-13mm (Micro U-D Master) (Please contact us for info).

• Manufactured from 316 stainless steel
• Satin polish (Ra< 1microns)
• Take Multiple Samples from the same Point
• Range of sampler lengths
• Change the sample volume by changing the insert
• Special finishes and materials of construction available on request.
Sample Inserts are available in a range 
of sizes from 0.1ml to 4.0ml, plus blank inserts
More than one sample can be taken from 
the same sampling point 
(See double or triple styles).
SINGLE COLLECTION POINT
TWO COLLECTION POINTS
OPERATION:

1. Select the correct volume Inserts and fit them  
     into the Inner Rod.

2. Slide the assembled Inner Rod into the Outer Sleeve
    at the lowest sampling level

3. Insert the sampler into the product, turn the handle 
    to expose the sampling cells to the product.

4. Double and Triple Style samplers - pull the handle to 
     the next level to expose the next set of sampling cells.

5. Turn the handle so no Sampling Inserts are exposed then
     remove the sampler from the product.

6. Remove the Inner Rod from the Outer Sleeve, the 
    individual  sampling inserts can then be easily 
    removed for analysis.
Raise the Inner Rod to the
Second sampling position
Sample Inserts are stamped with their volume for easy identification
SEE UD TABLET MAKER (FOR SINGLE STYLE ONLY REDUCES SAMPLING ERRORS)
ORDER ONLINE
MANUFACTURING
DISTRIBUTION
TECHNICAL SERVICES ​FOR
ANALYTICAL INSTRUMENTATION

TELEPHONE (804) 318-3686
TOLL FREE   (866) 244-1578

COMPLETE INTERACTIVE SAMPLER CATALOGUE
PDF DOWNLOAD